Adjusting the system pressure on the fuel metering device, adjusting the control pressure making a hole on the warm up valve and using the hidden allen key.
Mercedes 190 mixture adjustment.
Video to show how to test and adjust the Warm Up Regulator (WUR) on a Mk2 Golf Gti 16v KJet. Music: Dead As Disco - Journey [Jompa & Diversity Release] ...
VW Tech Talk 201: CIS-E Idle speed & CO adjustment. Covers adjusting the idle stabilizer, CO, and the differential pressure regulator.
Testing and setting a Bosch K-Jetronic warm-up regulator, Porsche 928. Rebuilds available at http://928classics.com/cis-service-and-parts.html.
Part 7 of the series deals with fuel distributors, and more beer. I may have had a drinking problem... I'm not sure, but it looks possible.
How to adjust the mixture and idle on an E21 BMW with a Bosch K-jetronic fuel injection system. This particular car is a 1982 320i, but it will work with other
Bosch K-Jetronic (CIS) Warm up Regulator.
Matching of the o-rings from the repair kit for Bosch K-Jetronic 8 CYL Fuel Distributor. Tips and tricks on how to easily assemble the distributor. The original
Finally tuned my 91 Mercedes 500SL Bosch CIS KE-Jetronic fuel injection system. After rebuilding fuel distributor many months ago I never had time to fine tune
Rare Ford Capri injection special V6 Stratos Sliver-V6 Number 2 an 4 injector dripping not holding pressure ⛽️
How to adjust an air flow meter spring wheel. Go counter clockwise for richer and clockwise for leaner. Most ARMs cone from the factory set very.lean. The Bosch
Monitoring the amperage to the electro hydraulic actuator watching lambda cycle.
89 mercedes no start ;; bad fuel distributor.
Right way to install the seal o-rings on the spring for the slits of the plunger barrel.
Tuning out my Fuel Injection on a Opel Kadett Utilizing a Gas Meter - Part 3.
From a Mercedes 500SEC 1984.
Tuning out my Fuel Injection on a Opel Kadett Utilizing a Gas Meter - Part 4.
Tuning out my Fuel Injection on a Opel Kadett Utilizing a Gas Meter - Part 5.
Bosch K-Jetronic (CIS) Gauge Setup.
Need to know what this part is called, and or if that is what the problem here is.
My engine working bad at idle. K-jetronic needs setup. The engine is at normal operating temperature.
Turns out that the air fuel mixture screw was adjusted for the plugged up regulator so when I unplugged it the car ran way too rich and stalled....I ended up ta
lubrication, the exact orientation, little effort Do not forget, it works up to 80PSI (6 bar) fuel pressure.
W124 230e M102 1992.
This video its no mine but i had to put in my channel due i want to help some people to fix the most common problem the poor acceleration in the Porsches 924 if
Tuning out my Fuel Injection on a Opel Kadett Utilizing a Gas Meter - Part 2.
Tuning out my Fuel Injection on a Opel Kadett Utilizing a Gas Meter - Part 1.
For Erich in NY Mercedes 300TE Slight leak on three ports. Restoreyourmercedes.com.
Mercedes 190 checking, adjusting to factory specification.
A correctly adjusted mixture is showned in this video (duty cycle is fluctuating around 50%). This video is related to my previous video concerning the faulty .
Basic setting of fuel delivery on the pump.
Rebuilding a Bosch CIS Fuel Head from a 1979 Porsche 911SC at BreitWerks.
A brief comparison of two similar CIS k jetronic fuel Distributors and air flow meters between model year 86 and 88.
Bought used fuel distributor. When installed cylinder 1 and 8 did not run on idle. When spark plug wire removed from those there is no change, engine runs ...
My W124 has been a project since i bought it. After restoring all the Chasis links with new Mercedes parts to increase its life time, I have also given it a new
Porsche 924 K-Jetronic injection system test. Appearently, this spray pattern is not ok. It should be more like a fine spray and less like a fountain.
Video posted for my sister and my family in Southampton : In (bad) english (sorry mates ^^) : Finally !!! She doesn't seem to run well, but only a specialist of
This video show my m102 engine Mercedes 190e 1.8 1990 year adjustment idle and duty cycle.
See how Hawaii's master Porsche mechanic Tim fixes an idle problem on an old 911 Porsche. Porsche 1978 911SC idle surging repair.
Porsche 911 Warm Up Regulator "WUR" Removal & Replacement Instructions Motor Meister. No special Porsche tools needed and removed in less then 3 ...
Mercedes R107 500SL with electronically adjusted idle control valve. System overview, testing, troubleshooting and a cheap 50 cent fix of the Idle Control ...
This video is about idle fluctuations on D-Jetronic equipped Mercedes-Benz. Video web links: http://www.benzshops.com/florida/pierre-hedarys ...